The topic of the thermal and acoustic insulation is on the agenda in all industrial, productive, civil,naval areas. An increasing challenge, pushed also from a greater and chasing sensitization towards the problems of environment, ecology, and from regulations and laws as regards.

You apply as common paints: spray, brush, rolls, etc…   Temperature of resistance: from -100°C to + 250°C till 350°C. High fire resistance: fire-stopping products.  Thermal conductivity: 0,020 W/mK.   Heat reduction: till 85% of the temperature with 4 - 8 mm of thickness – reachable in two layers.   You use instead of the conventional and traditional systems: fiber-glass – fiber-rock, polyurethane, etc.  Products for-life: it is not necessary maintenance. Easy to be removed in case of maintenance. Application speedness: 16 times faster than traditional systems . Acoustic insulation: 1-3 dB a 45 dB, according with the frequencies. Thet solve, at the same time, the problem of thermal insulation – acoustic insulation – anti-condenses, anti-corrosive, with the relative saving in not having to apply distinguished products.  It is not necessary to employ different products in order to solve problems of thermal protection and acoustic: an only product for different problems.   Elimination of the problems of corrosion under insulation.   You can apply in every type of surface: glass, wood, cement, iron, steel – eventually you can use specific primers.   Excellent for application in critical situations. Water based, extremely light, ecologic, no-toxic even in case of fire, it withstands to chemical and atmospheric agents. Time resistant, environment free, resistant to bugs and micro organisms, chemically inert, sterile and do not form particell flown. Customized products: we can customize the products according with your necessities.	INSULATION OF NEW GENERATION SYSTEMS APPLIABLE LIKE COMMON PAINTS LOW THICKNESS: max 8 mm RESISTANT TILL 700°Cc TEMPERATURE REDUCTION: 80 % NO NANOTECHNOLOGIES MADE IN ITALY INDUSTRIAL APPLICATIONS Resevoir, tanks, Cooling towers Valves and pipings Industrial furnaces Rafineries, Foudries, Oils and petrochemicals Automotive, industrial vehicles, bus: inside car, engine   MARINE APPLICATIONS Engine area, Hexhaust systems Air conditioningsystems(elimination of the condenses)    CIVIL APPLICATIONS Roofs and Walls Internal insulation Floor insualtion Windows insulation

Download Catalogue

Our products are applied like common paints: spray, roll, hands, paint-brush and on all surfaces

SHIELD COAT is an insulation coating fitted to solve problems of thermal and acoustic insulation, also in hard and extreme situations.

Flexible, light, ecologic, environnement friendly, non-toxic, water-based, easy in the application, even in vertical position, for the insulation of roofs, wallscivil structures, tanks, pipings, ecc.

FOAMING VERSIONS:  Volume Expansion: 500% Working Temperature from -100°C to +250°C till 350°C High resistance to direct fire High level of acuoustic reduction High reduction of vibrations SHIELD COAT FOAM TAP Instantly Expansion with dedicated systems Working Temperature: -100°C° +250°C till 350°C Fire-Stopping   Datga Sheet Shield Coat TAP     SHIELD COAT FOAM T70 Instantly Expansion with heating at 70°C for 1 hour  WorkingTemperature -100°C° +250°C till 350°C Fire-Stopping Data Sheet Shield Coat T70     NON-FOAMING VERSIONS: Temperature from -100°C to +700°C   SHIELD COAT 250 Working Temperature: -100°C° +250°C Self-Estinguishable Data Sheet Shield Coat 250 Producs are: over-painting can be linked together, in order to obtain right answers to differrent thermal, acoustic and mechnical situations Finishings for high mechanical resistance and UV reflective. Download general catalogue

IMPORTANT TO UNDERLINE The superlative resistance and thermal protection, unique in the specific sector: the insulation withstands till 1600°C. With a thickness of 4-8 mm of cover, it is possible to pass from 600° C to 116°C. Our products bind together and at the same time the function of thermal protection - acoustic – anti-condenses - anticorrosive, with the relative saving in not having to apply distinguished products. an only product for two different problems. Our insulations can be easily customized according with your necessities and specific problems. Not standard products, but following your necessities. Thermal and acoustic problems are very complex and with many variables. Here because it is necessary to create products “ad-hoc” and answering to the different necessities. This is possible thanks to ours flexible and competent research & development laboratories.  The compounds are totally non-toxic; also in case of fire, resistant to many chemical and atmospheric agents as well as fire-stopping. Products can be combined together in order to obtein different solutions to deifferent thermal, mechanical and acoustic problems.

Spray - Brush - Rolls

TECHNICAL DATA - SPRAY SYSTEM APPLICATION

Video SHIELD COAT

 
Miscelazione prodotto / Product mixing 

Collettore Scarico Motori / Exhaust Engine Systems

Video collettore scarico motiri / Exhaust system application

Applicazione edile / Civil application

Applicazioni a pistola / Spray application

​

Technical Data

THERMAL TEST

ACOUSTIC TEST

Acoustic reduction with the product covering: Frequence Hz

CHIMICAL RESISTANCE:

These thermal insulation systems, can be applied on any surface?

Thermal insulation systems Shield Coat can be applied on any type of surface: glass, wood, concrete, masonite, metals in general. In the case of applications particularly smooth surfaces, we recommend applying a primer designed to increase grip. In case of application of Shield Coat 600 version, the application of the primer is highly recommended, either to increase the grip both to improve the behavior of the system to the thermal expansion of the underlying support. Always for the 600° C system is strongly recommended the application of consolidating finish, in order to give more structure to the system, since you may experience weakness in the presence of strong vibrations. 

What is thermal reduction?

With a thickness of 8 mm, it is possible to achieve a reduction of 80%. 

What is the recommended thickness of product to have an excellent thermal protection?

Thickness is a function of temperature to be obtained. Recommended minimum thickness is 6 mm, which can be obtained with 2 coats of product application. This product is very light and does not drip. 

How do I apply these products?

Our thermal insulation systems can be applied as a common paint: spray, brush, roller, spatula. 

How long will it take for the product to dry?
The total time total of polymerisation of the product is 24-48 hours, depending on weather conditions. Between a hand and the other simply wait 2-4 hours, to allow the surface to dry (out-dust) 

How these products behave in the presence of strong corrosion?
Our systems Shield Coat, solve the problem of corrosion under insulation. They are also highly effective as an anti-condensation, mould, with the possibility to save costs in not having to apply distinct products, even in very difficult situations and critical applications

Are toxic products? 
Our products are absolutely non-toxic. Are all water based with zero VOCS. 

What is the reaction-to-fire? 
Our thermal insulating are self-extinguishing, we also have fire-retardant versions in class REI. 

It is possible to combine the different systems?

Shield Coat Systems con be overlap each other in order to create systems to various situations. 

Some examples:

You can apply 4 mm of insulation Shield Coat 250 or 600 mm and 4 mm of Shield Coat Fireproof in order to have have a thermal protection and fire protection. 

You can apply 6 mm of insulation Shield Coat 250 or 600 mm and with 2 mm of consolidating finish / high-strenght finish, to have a thermal protection combined with a high quality finish and excellent mechanical resistance and with the color you want. 

Our engineers will assess the best combination in order to solve your problems.